Ссылка на источник:
Brian Stott on Myminifactory
Support Removal There is a support upright for the cartridge follower compressor tab. There are also thin connections from the support and compressor tab to the speed loader frame. Cut the thin connections to the frame and break the upright support free. The support piece will break about 18 mm (almost 3/4") down from the top of the loader. Run an exacto or thin blade between the frame and the follower compressor tab (the protrusion). If needed, clear between the tab and the frame to nearly 25mm from the roof of the inside top of the loader. You may not need more trimming depending on your printer. Magazine clearance behind tab.
Лицензия:
MyMiniFactory License. You can use this 3D model for your own commercial purposes. Please credit the designer when sharing this model.
Количество скачиваний: 24
Format
STL
Size
40.92mm x 40.92mm x 52.63mm
3D Print Ready
Yes
