Retaining band holder for luggage compartement cover 3D Model

Attribution link: Max on Myminifactory
General information I've printed the part on a printer which wasn't fully calibrated at the time of printing. Regarding the print quality, there are several things that can be improved. Since I'm going to sell the car, I don't think that I'm going to print it again. Printer MKC MK2 v1.0 Slicer Simplify3D Layer Primary Layer Height: 0,1 mm Top Solid Layers: 10 Bottom Solid Layers: 10 Outline/Perimeter Shells: 4 Infill Internal Fill Pattern: Fast Honeycomb External Fill Pattern: Rectilinear Interior Fill Percentage: 30 % Outline Overlap: 15 % Infill Extrusion Width: 150 % Minimum Infill Length: 5,00 mm Support Note: I've printed this part with (too much) infill. I think that you should be able to print it without supportor only with support near the bottom to support the overhang. Material ABS from Material4Print; gray Temperatures and build surface Extruder: 245 C Heated Bed: First Layer: 120 C Following Layers: 110 C build surface: Pertinax Speeds Default Printing Speed: 80 mm/s Outline Underspeed: 50 % Solid Infill Underspeed: 80 % Support Structure Underspeed: 80 %
License:
MyMiniFactory License. You can use this 3D model for your own commercial purposes. Please credit the designer when sharing this model.
10 downloads
Format
STL
3D Print Ready
Yes