Dungeon Stone Primary Walls 3D Model

Attribution link: Devon Jones on Myminifactory
You are going to first want to decide if you are going to glue pieces or not. If you don't want to glue anything, select the files named dungeon_stone_wall.inch..low.triplex.. If you want magnets, then select dungeon_stone_wall.inch..low.openforge.. It is not critical that every wall be the same. If you are using the openforge varients, you will also need to print a base: dungeon_stone_base.inch..openlock.magnetic. Second you will want to decide if you want sidelocking. Odds are you do. For that, select files with .side. in the name. Finally you will want to choose if you want pegs. Pegs are used for indexing a second floor. If you never plan on building multi floor layouts, skip them. Even if you do, you may not want them on all tiles, as they can interfere with the aesthetics a little. We print them on about half of our A walls, which gives enough to index an upper layer if you want.
License:
MyMiniFactory License. You can use this 3D model for your own commercial purposes. Please credit the designer when sharing this model.
118 downloads
Format
STL
Size
51.1mm x 51.1mm x 44.78mm
3D Print Ready
Yes