Attribution link:
Walter Hsiao on Myminifactory
Printer : EustathiosRafts : NoSupports : NoInfill : 100%Notes : 0.4mm extrusion width recommended Post printing Uses [10mm diameter rare earth magnets*](http://amzn.to/2thAkml), which come in a variety of thicknesses - The thinner magnets allow for more configuration options, using more magnets should result in transitioning at higher speeds. [Superlube oil*](http://amzn.to/2sFivjn) or similar - I usually disassemble it after printing and a few minutes of break-in, then add one drop of superlube into each of the pivot points. How I designed this Here's the design file if you need to make any adjustments to the tolerances, etc: https://cad.onshape.com/documents/33a28fa59ba204bb3a1306d4/w/5d553ff0b7ec85cfe29740a9/e/43834d9d41c851f0266f0326
License:
MyMiniFactory License. You can use this 3D model for your own commercial purposes. Please credit the designer when sharing this model.
21 downloads
Format
STL
Size
83mm x 83mm x 10mm
3D Print Ready
Yes
