Encounter Shrine of Lamashtu 3D 모델

Parts of the shrine First off, we have the statue to Lamashtu. She's attached to a cut stone 2x2 riser. I printed her on the anycubic photon. If you don't think your printer is up to printing it, Paizo sells a beautiful prepainted Lamashtu miniature that is based on the same artwork as my design. Second, we have the braziers. Lamashtu is associated with both blue and red flame. For these, I filled the brazier with hot glue. I used blue ink on the first flame, and red and yellow inks on the second one. To achieve a good effect, I added in layers of hot glue, ink, hot glue, repeat. For the red flame, I used red ink lower in the flame, and yellow on the outer layers. Third, we have the birthing pool. A place for the cultists of Lamashtu to bring their pregnant victims to birth horrors. For this I used 3 greens (Americana Evergreen, Hauser Medium Green and Hauser Light Green). The two darker ones I wet blended on the "water" surface to create a mottled effect. I then painted the bubbles with the light green. Finally I covered the whole pool with Woodland Scenics Water. Finally, for the Lamashtu symbols, I painted those with a dark ochre, then used a brown ink to create some depth. Finally I used a light ochre around the edges to make the lines pop.

특허: